top of page

How to Care and Maintenance

After receiving a comfortable shower, paying close attention to daily cleaning and maintenance is important to make the whole shower room last longer.

I. Cleaning 

  • Use a soft, dry cloth when cleaning the shower to avoid scratching the glass and affecting the visual appearance of the shower.

  • To scrub the shower screen, do not use acidic or alkaline solvents, acetone dilutions, or stain removers.

  • Nylon products can cause the product to lose their lustre and form dirt easily. When stains cannot be removed with water or a neutral detergent, use a cleaning cloth soaked in a small amount of alcohol or a glass cleaner.

  • Do not use any abrasive cleaners, cloths, or paper cloths; do not use acid-based cleaners, polishing rubbers, or harsh cleaners.

II. Maintenance of Tempered Glass 

  • The tempered glass in shower rooms should not be hit with sharp objects to avoid breakage. 

  • Do not use corrosive liquids to wipe the surface of the glass, and do not wipe with a cloth that is too rough, as it will cause scratches on the glass.

  • If there is a window facing the sun in the bathroom, it is necessary to prevent direct sunlight and exposure to the sun to avoid fading the sprayed plastic layer of the shower room.

III. Use and Maintenance of Shower Screen 

  • The pulleys and sliders of the shower room sliding door should be avoided to avoid forceful impact to prevent the movable door from falling off.

  • Regularly clean the sliding rail, pulley and slider, and fill them with lubricant. 

  • Regularly adjust the adjusting screws of the slider to ensure the effective loading and good sliding of the slider to the movable door.

IV. Stainless Steel Maintenance 

  • Rust caused by dirt on the surface of stainless steel can be washed with 10% nitric acid or abrasive detergent or with special stainless steel washing chemicals.

  • Avoid using bleach and abrasive detergents, steel balls, abrasive tools, etc. To avoid residual detergent from eroding the stainless steel surface, rinse the surface with clean water at the end of washing.

  • Do not use rough and sharp materials to scrub the stainless steel surface to avoid scratching.

V. Maintenance of Bath Screen Accessories 

  • Pay attention to the regular cleaning of rails, pulleys, sliders, and filling lubricant (lubricant oil or lubricant wax).

  • The pulleys and sliders should be used to avoid the following force against the movable door so as not to cause the movable door to fall off.

  • Regularly adjust the adjusting screw of the slider to ensure the effective load and good sliding of the slider on the movable door.

bottom of page